Determine when to safely transition your child’s car seat from rear-facing to forward-facing mode using a 5-point harness system.
When to Switch from Rear-Facing to Forward-Facing
A child should remain rear-facing until they reach the maximum rear-facing limits allowed by their car seat.
You should switch to forward-facing only when your child exceeds either:
- The rear-facing weight limit
- The rear-facing height limit
- Any other rear-facing restriction listed in your instruction manual
The instruction manual is the final authority for determining when to transition.
Rear-Facing Requirements
When a child is rear-facing:
- The car seat must remain installed in rear-facing mode only.
- The child must remain within all rear-facing limits in the instruction manual.
- The harness must be properly adjusted according to rear-facing setup instructions in the manual.
Always follow the instruction manual for correct positioning and adjustment.
Forward-Facing Requirements
When a child transitions to forward-facing:
- The car seat must be reconfigured to forward-facing mode (if applicable).
- The child must meet all forward-facing requirements listed in the instruction manual.
- The harness must be adjusted for forward-facing use according to the manual.
Forward-facing use must only begin once rear-facing limits have been exceeded.
Harness Position When Switching Modes
When switching between rear-facing and forward-facing:
- Rear-facing: Harness straps should be at or just below shoulder level.
- Forward-facing: Harness straps should be at or just above shoulder level.
Always refer to your instruction manual for correct harness adjustment steps for your specific model.
If You Are Unsure
If you are unsure whether your child is ready to transition:
- Check your car seat instruction manual first.
- Confirm weight and height limits listed for your specific model.
- Contact Customer Care if additional clarification is needed.
Never transition modes without confirming the requirements in your manual.